Homepage › Technical Specifications of Cars › Nissan › Skyline 2000 GT Sedan

1969 - Nissan - Skyline 2000 GT Sedan

Technical Specs of This Model
1. Skyline 2000 GT Sedan 1969
2. Skyline 2000 GT Sedan 1979
General Information
Make Nissan
Model Skyline 2000 GT Sedan
Production Year 1969
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2460 mm     (96,9 in)
Front Track 1325 mm     (52,2 in)
Rear Track 1320 mm     (52 in)
Length 4400 mm     (173,2 in)
Width 1595 mm     (62,8 in)
Height 1390 mm     (54,7 in)
Ground Clearance
Length / Wheelbase Ratio 1,79
Weight 1115 kg     (2455,9 lb)
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Nissan / Datsun
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 1998 cc     (121,93 cu in)
Bore 78 mm     (3,07 in)
Stroke 69,7 mm     (2,74 in)
Bore / Stroke Ratio 1,12
Unitary Capacity 333 cc/cylinder    (20,32 cu in/cylinder)
Number of Main Bearings
Compression Ratio 9 : 1
Fuel System Type 1 Hi carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 120 HP     (89,5 kW)
Maximum Engine Power rpm 6000 d/d
Maximum Engine Torque 167 N.m     (123,2 lb.ft ,  17 kg.m)
Maximum Engine Torque rpm 4000 d/d
Engine Torque at Max. Engine Power rpm 142,4 N.m    (6000 d/d)
Power / Weight Ratio 107,6 HP/ton    (80,3 W/kg)
Power / Engine Displacement Ratio 60,1 HP/litre    (44,8 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 175 km/h   (108,8 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 3,9 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.MS.CS.LW.ARB.
Suspension (rear) I.STA.CS.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)