Homepage Technical Specifications of Cars Nissan Gloria 300 Ultima Z GT

1999 - Nissan - Gloria 300 Ultima Z GT

Technical Specs of This Model
1. Gloria 300 Ultima Z GT 1999
General Information
Make Nissan
Model Gloria 300 Ultima Z GT
Production Year 1999
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2800 mm     (110,2 in)
Front Track 1520 mm     (59,8 in)
Rear Track 1520 mm     (59,8 in)
Length 4865 mm     (191,5 in)
Width 1770 mm     (69,7 in)
Height 1450 mm     (57,1 in)
Ground Clearance 145 mm     (5,7 in)
Length / Wheelbase Ratio 1,74
Weight 1680 kg     (3700,4 lb)
Weight Distribution (front/rear)
Fuel Capacity 80 litre   (17,6 Imp gal ,  21,1 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Nissan
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement V-6
Valves per Cylinder 4    (Total of 24 Pieces)
Engine Displacement 2987 cc     (182,28 cu in)
Bore 93 mm     (3,66 in)
Stroke 73,3 mm     (2,89 in)
Bore / Stroke Ratio 1,27
Unitary Capacity 497,83 cc/cylinder    (30,38 cu in/cylinder)
Number of Main Bearings 4
Compression Ratio 9 : 1
Fuel System Type EFi
Aspiration Type Turbo
Compressor Type
Intercooler Type
Catalytic Converter Yes
Maximum Engine Power 280 HP     (208,8 kW)
Maximum Engine Power rpm 6000 d/d
Maximum Engine Torque 387 N.m     (285,6 lb.ft ,  39,5 kg.m)
Maximum Engine Torque rpm 3600 d/d
Engine Torque at Max. Engine Power rpm 332,3 N.m    (6000 d/d)
Power / Weight Ratio 166,7 HP/ton    (124,3 W/kg)
Power / Engine Displacement Ratio 93,7 HP/litre    (69,9 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type CVT
Top Gear Ratio 0,66 : 1
Final Drive Ratio 3,69 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock)
Turning Circle Diameter 11 m    (36,1 ft)
Suspension (front) I.S.
Suspension (rear) I.MultiLi.
Brakes (front/rear) VeDi/VeDi-S-ABS
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)