Homepage Technical Specifications of Cars Opel Omega 3.0 Elite

1994 - Opel - Omega 3.0 Elite

Technical Specs of This Model
1. Omega 3.0 Elite 1994
General Information
Make Opel
Model Omega 3.0 Elite
Production Year 1994
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2730 mm     (107,5 in)
Front Track 1515 mm     (59,6 in)
Rear Track 1530 mm     (60,2 in)
Length 4788 mm     (188,5 in)
Width 1798 mm     (70,8 in)
Height 1455 mm     (57,3 in)
Ground Clearance
Length / Wheelbase Ratio 1,75
Weight 1480 kg     (3259,9 lb)
Weight Distribution (front/rear)
Fuel Capacity 75 litre   (16,5 Imp gal ,  19,8 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Opel
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement V-6
Valves per Cylinder 4    (Total of 24 Pieces)
Engine Displacement 2962 cc     (180,75 cu in)
Bore 86 mm     (3,39 in)
Stroke 85 mm     (3,35 in)
Bore / Stroke Ratio 1,01
Unitary Capacity 493,67 cc/cylinder    (30,13 cu in/cylinder)
Number of Main Bearings
Compression Ratio 10,8 : 1
Fuel System Type
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 207 HP     (154,4 kW)
Maximum Engine Power rpm 6200 d/d
Maximum Engine Torque 270 N.m     (199,3 lb.ft ,  27,5 kg.m)
Maximum Engine Torque rpm 3600 d/d
Engine Torque at Max. Engine Power rpm 237,7 N.m    (6200 d/d)
Power / Weight Ratio 139,9 HP/ton    (104,3 W/kg)
Power / Engine Displacement Ratio 69,9 HP/litre    (52,1 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph 9,5 s
0 - 100 km/h
0 - 160 km/h 24,6 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 17,2 s
0 - 1000 m Acceleration 30,7 s
Top Speed 225 km/h   (139,8 mph)
Gearbox and Transmission
Transmission Type 4A
Top Gear Ratio 0,72 : 1
Final Drive Ratio 3,9 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball VPAS
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.MS.CS.ARB.
Suspension (rear) I.MLi.CS.ARB.
Brakes (front/rear) VeDi/Di-S-ABS
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)