Homepage Technical Specifications of Cars Opel Commodore Berlina 2.5S

1980 - Opel - Commodore Berlina 2.5S

Technical Specs of This Model
1. Commodore Berlina 2.5S 1980
General Information
Make Opel
Model Commodore Berlina 2.5S
Production Year 1980
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2667 mm     (105 in)
Front Track 1443 mm     (56,8 in)
Rear Track 1425 mm     (56,1 in)
Length 4732 mm     (186,3 in)
Width 1722 mm     (67,8 in)
Height 1410 mm     (55,5 in)
Ground Clearance
Length / Wheelbase Ratio 1,77
Weight 1200 kg     (2643,2 lb)
Weight Distribution (front/rear)
Fuel Capacity 65 litre   (14,3 Imp gal ,  17,2 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Opel
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 2490 cc     (151,95 cu in)
Bore 87 mm     (3,43 in)
Stroke 69,8 mm     (2,75 in)
Bore / Stroke Ratio 1,25
Unitary Capacity 415 cc/cylinder    (25,32 cu in/cylinder)
Number of Main Bearings 7
Compression Ratio 9,4 : 1
Fuel System Type 1 Ze carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 115 HP     (85,8 kW)
Maximum Engine Power rpm 5800 d/d
Maximum Engine Torque 179 N.m     (132,1 lb.ft ,  18,3 kg.m)
Maximum Engine Torque rpm 4200 d/d
Engine Torque at Max. Engine Power rpm 141,2 N.m    (5800 d/d)
Power / Weight Ratio 95,8 HP/ton    (71,5 W/kg)
Power / Engine Displacement Ratio 46,2 HP/litre    (34,4 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 4OD
Top Gear Ratio 0,78 : 1
Final Drive Ratio 3,45 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball PAS
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.MS.CS.
Suspension (rear) I.STA.CS.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)