Homepage Technical Specifications of Cars Opel Omega 3.0i CDX Estate

1990 - Opel - Omega 3.0i CDX Estate

Technical Specs of This Model
1. Omega 3.0i CDX Estate 1990
General Information
Make Opel
Model Omega 3.0i CDX Estate
Production Year 1990
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S EST
Number of Doors 5
Wheelbase 2730 mm     (107,5 in)
Front Track 1447 mm     (57 in)
Rear Track 1473 mm     (58 in)
Length 4730 mm     (186,2 in)
Width 1773 mm     (69,8 in)
Height 1530 mm     (60,2 in)
Ground Clearance
Length / Wheelbase Ratio 1,73
Weight 1500 kg     (3304 lb)
Weight Distribution (front/rear) %52 / %48
Fuel Capacity 70 litre   (15,4 Imp gal ,  18,5 US gal)
Aerodynamics
Drag Coefficient 0,32
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Opel
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 2969 cc     (181,18 cu in)
Bore 95 mm     (3,74 in)
Stroke 69,8 mm     (2,75 in)
Bore / Stroke Ratio 1,36
Unitary Capacity 494,83 cc/cylinder    (30,2 cu in/cylinder)
Number of Main Bearings 7
Compression Ratio 9,4 : 1
Fuel System Type Bo LE-Jet fuel inj.
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 177 HP     (132 kW)
Maximum Engine Power rpm 5600 d/d
Maximum Engine Torque 240 N.m     (177,1 lb.ft ,  24,5 kg.m)
Maximum Engine Torque rpm 4400 d/d
Engine Torque at Max. Engine Power rpm 225,1 N.m    (5600 d/d)
Power / Weight Ratio 118 HP/ton    (88 W/kg)
Power / Engine Displacement Ratio 59,6 HP/litre    (44,5 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 6 s
0 - 60 mph 8,4 s
0 - 100 km/h
0 - 160 km/h 27,3 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 16,4 s
0 - 1000 m Acceleration 30,5 s
Top Speed 211 km/h   (131,1 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,84 : 1
Final Drive Ratio 3,7 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball PAS
Steering Turns (lock to lock) 3,25
Turning Circle Diameter
Suspension (front) I.MS.ARB.
Suspension (rear) I.STA.CS.ARB.
Brakes (front/rear) VeDi/Di
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)