Homepage Technical Specifications of Cars Opel Monza 2.5 Automatic

1985 - Opel - Monza 2.5 Automatic

Technical Specs of This Model
1. Monza 2.5 Automatic 1985
General Information
Make Opel
Model Monza 2.5 Automatic
Production Year 1985
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 2668 mm     (105 in)
Front Track 1447 mm     (57 in)
Rear Track 1472 mm     (58 in)
Length 4720 mm     (185,8 in)
Width 1722 mm     (67,8 in)
Height 1380 mm     (54,3 in)
Ground Clearance 140 mm     (5,5 in)
Length / Wheelbase Ratio 1,77
Weight
Weight Distribution (front/rear)
Fuel Capacity 70 litre   (15,4 Imp gal ,  18,5 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Opel
Engine Location Front
Engine Alignment Longitudinal
Engine Construction cast iron block & head
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 2490 cc     (151,95 cu in)
Bore 87 mm     (3,43 in)
Stroke 69,8 mm     (2,75 in)
Bore / Stroke Ratio 1,25
Unitary Capacity 415 cc/cylinder    (25,32 cu in/cylinder)
Number of Main Bearings 7
Compression Ratio 9,2 : 1
Fuel System Type Bo LE-Jetronic fuel injection
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 138 HP     (102,9 kW)
Maximum Engine Power rpm 5200 d/d
Maximum Engine Torque 205 N.m     (151,3 lb.ft ,  20,9 kg.m)
Maximum Engine Torque rpm 4000 d/d
Engine Torque at Max. Engine Power rpm 189 N.m    (5200 d/d)
Power / Weight Ratio
Power / Engine Displacement Ratio 55,4 HP/litre    (41,3 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 193 km/h   (120 mph)
Gearbox and Transmission
Transmission Type 4A
Top Gear Ratio 0,81 : 1
Final Drive Ratio 3,79 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball PAS
Steering Turns (lock to lock) 4
Turning Circle Diameter 10,8 m    (35,4 ft)
Suspension (front) I.MS.TrailLi.CS.ARB.
Suspension (rear) I.STA.CS.ARB.
Brakes (front/rear) VeDi/Di-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front) 6 x 14
Wheels (rear) 6 x 14
Tyres (front) 195/70 VR 14
Tyres (rear) 195/70 VR 14