Homepage › Technical Specifications of Cars › Packard › Twin Six V12 Tenth Series

1934 - Packard - Twin Six V12 Tenth Series

Technical Specs of This Model
1. Twin Six V12 Tenth Series 1934
General Information
Make Packard
Model Twin Six V12 Tenth Series
Production Year 1934
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S DHC
Number of Doors 2
Wheelbase 3530 mm     (139 in)
Front Track 1524 mm     (60 in)
Rear Track 1549 mm     (61 in)
Length 5461 mm     (215 in)
Width 1880 mm     (74 in)
Height
Ground Clearance
Length / Wheelbase Ratio 1,55
Weight 2794 kg     (6154,2 lb)
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Packard
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SV
Number of Cylinders and Placement V-12
Valves per Cylinder 2    (Total of 24 Pieces)
Engine Displacement 7298 cc     (445,35 cu in)
Bore 87,3 mm     (3,44 in)
Stroke 101,6 mm     (4 in)
Bore / Stroke Ratio 0,86
Unitary Capacity 608,17 cc/cylinder    (37,11 cu in/cylinder)
Number of Main Bearings 4
Compression Ratio 6 : 1
Fuel System Type 1 St EE3 carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 175 HP     (130,5 kW)
Maximum Engine Power rpm 3200 d/d
Maximum Engine Torque
Maximum Engine Torque rpm
Engine Torque at Max. Engine Power rpm 389,4 N.m    (3200 d/d)
Power / Weight Ratio 62,6 HP/ton    (46,7 W/kg)
Power / Engine Displacement Ratio 24 HP/litre    (17,9 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph 17 s
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 150 km/h   (93,2 mph)
Gearbox and Transmission
Transmission Type 3M
Top Gear Ratio 1 : 1
Final Drive Ratio 4,41 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type worm & roller
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) LA.SE.
Suspension (rear) LA.SE.
Brakes (front/rear) Dr/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front) 7.50 x 17
Tyres (rear) 7.50 x 17