[Türkçe]
[English]
[E-mail]
[Ads / Stats]
Homepage
Clubs
Teams
Competitors
Makes
Sponsors
Technical Specs of Cars
Search :
Homepage
›
Technical Specifications of Cars
›
Packard
›
Clipper Super
1957 - Packard - Clipper Super
All Technical Specifications
Technical Specs of This Model
1.
Clipper Super 1957
2.
Clipper Super 1957
General Information
Make
Packard
Model
Clipper Super
Production Year
1957
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type
4/5S SAL
Number of Doors
Wheelbase
3099 mm (122 in)
Front Track
1518 mm (59,8 in)
Rear Track
1524 mm (60 in)
Length
5461 mm (215 in)
Width
1981 mm (78 in)
Height
1575 mm (62 in)
Ground Clearance
Length / Wheelbase Ratio
1,76
Weight
1676 kg (3691,6 lb)
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
C
x
Engine Specifications
Engine Manufacturer
Packard
Engine Location
Front
Engine Alignment
Longitudinal
Engine Construction
Coolant Type
Water
Engine Type
OHV
Number of Cylinders and Placement
V-8
Valves per Cylinder
2 (Total of 16 Pieces)
Engine Displacement
5766 cc (351,86 cu in)
Bore
101,6 mm (4 in)
Stroke
88,9 mm (3,5 in)
Bore / Stroke Ratio
1,14
Unitary Capacity
720,75 cc/cylinder (43,98 cu in/cylinder)
Number of Main Bearings
Compression Ratio
9,5 : 1
Fuel System Type
1 Ca carb
Aspiration Type
Normal
Compressor Type
-
Intercooler Type
None
Catalytic Converter
No
Maximum Engine Power
240 HP (179 kW)
Maximum Engine Power rpm
4600 d/d
Maximum Engine Torque
475 N.m (350,6 lb.ft , 48,4 kg.m)
Maximum Engine Torque rpm
2800 d/d
Engine Torque at Max. Engine Power rpm
371,5 N.m (4600 d/d)
Power / Weight Ratio
143,2 HP/ton (106,8 W/kg)
Power / Engine Displacement Ratio
41,6 HP/litre (31 kW/litre)
CO
2
Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type
3A
Top Gear Ratio
1 : 1
Final Drive Ratio
3,31 : 1
Drive Wheels
RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front)
I.TB.
Suspension (rear)
LA.TB.
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)