1980 - Peugeot - 305 GR Diesel

Technical Specs of This Model
1. 305 GR Diesel 1980
General Information
Make Peugeot
Model 305 GR Diesel
Production Year 1980
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2616 mm     (103 in)
Front Track 1372 mm     (54 in)
Rear Track 1321 mm     (52 in)
Length 4242 mm     (167 in)
Width 1626 mm     (64 in)
Height 1422 mm     (56 in)
Ground Clearance
Length / Wheelbase Ratio 1,62
Weight 975 kg     (2147,6 lb)
Weight Distribution (front/rear)
Fuel Capacity 43,2 litre   (9,5 Imp gal ,  11,4 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1548 cc     (94,47 cu in)
Bore 80 mm     (3,15 in)
Stroke 77 mm     (3,03 in)
Bore / Stroke Ratio 1,04
Unitary Capacity 387 cc/cylinder    (23,62 cu in/cylinder)
Number of Main Bearings
Compression Ratio 22,5 : 1
Fuel System Type Bo diesel pump
Aspiration Type Normal D.
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 49 HP     (36,5 kW)
Maximum Engine Power rpm 5000 d/d
Maximum Engine Torque 85 N.m     (62,7 lb.ft ,  8,7 kg.m)
Maximum Engine Torque rpm 2500 d/d
Engine Torque at Max. Engine Power rpm 69,8 N.m    (5000 d/d)
Power / Weight Ratio 50,3 HP/ton    (37,5 W/kg)
Power / Engine Displacement Ratio 31,7 HP/litre    (23,6 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1,01 : 1
Final Drive Ratio 4,06 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.MS.CS.
Suspension (rear) I.TA.CS.
Brakes (front/rear) Di/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)