1956 - Studebaker - Golden Hawk

Technical Specs of This Model
1. Golden Hawk 1956
2. Golden Hawk 1957
General Information
Make Studebaker
Model Golden Hawk
Production Year 1956
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S FHC
Number of Doors 2
Wheelbase 3060 mm     (120,5 in)
Front Track 1440 mm     (56,7 in)
Rear Track 1440 mm     (56,7 in)
Length 5180 mm     (203,9 in)
Width 1790 mm     (70,5 in)
Height 1430 mm     (56,3 in)
Ground Clearance
Length / Wheelbase Ratio 1,69
Weight 1524 kg     (3356,8 lb)
Weight Distribution (front/rear)
Fuel Capacity 68 litre   (15 Imp gal ,  18 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Packard
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 5768 cc     (351,99 cu in)
Bore 101,6 mm     (4 in)
Stroke 88,9 mm     (3,5 in)
Bore / Stroke Ratio 1,14
Unitary Capacity 721 cc/cylinder    (44 cu in/cylinder)
Number of Main Bearings
Compression Ratio 9,5 : 1
Fuel System Type 1 Ca carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 275 HP     (205,1 kW)
Maximum Engine Power rpm 4600 d/d
Maximum Engine Torque 515 N.m     (380,1 lb.ft ,  52,5 kg.m)
Maximum Engine Torque rpm 2800 d/d
Engine Torque at Max. Engine Power rpm 425,7 N.m    (4600 d/d)
Power / Weight Ratio 180,4 HP/ton    (134,6 W/kg)
Power / Engine Displacement Ratio 47,7 HP/litre    (35,6 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 7,4 s
0 - 60 mph 9,6 s
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 209 km/h   (129,9 mph)
Gearbox and Transmission
Transmission Type
Top Gear Ratio 0,74 : 1
Final Drive Ratio 3,92 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.CS.
Suspension (rear) LA.SE.
Brakes (front/rear) Dr/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front) 7.10 x 15
Tyres (rear) 7.10 x 15