Homepage Technical Specifications of Cars Nissan Skyline GT-R Hardtop

1969 - Nissan - Skyline GT-R Hardtop

Technical Specs of This Model
1. Skyline GT-R Hardtop 1969
2. Skyline GT-R Hardtop 1969
General Information
Make Nissan
Model Skyline GT-R Hardtop
Production Year 1969
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S FHC
Number of Doors 2
Wheelbase 2570 mm     (101,2 in)
Front Track 1370 mm     (53,9 in)
Rear Track 1365 mm     (53,7 in)
Length 4330 mm     (170,5 in)
Width 1655 mm     (65,2 in)
Height 1370 mm     (53,9 in)
Ground Clearance
Length / Wheelbase Ratio 1,68
Weight 1100 kg     (2422,9 lb)
Weight Distribution (front/rear) %55 / %45
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Nissan
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement S-6
Valves per Cylinder 4    (Total of 24 Pieces)
Engine Displacement 1989 cc     (121,38 cu in)
Bore 82 mm     (3,23 in)
Stroke 62,8 mm     (2,47 in)
Bore / Stroke Ratio 1,31
Unitary Capacity 331,5 cc/cylinder    (20,23 cu in/cylinder)
Number of Main Bearings
Compression Ratio 9,5 : 1
Fuel System Type 3 Mi-So carbs
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 160 HP     (119,3 kW)
Maximum Engine Power rpm 7000 d/d
Maximum Engine Torque 176 N.m     (129,9 lb.ft ,  18 kg.m)
Maximum Engine Torque rpm 5600 d/d
Engine Torque at Max. Engine Power rpm 162,8 N.m    (7000 d/d)
Power / Weight Ratio 145,5 HP/ton    (108,5 W/kg)
Power / Engine Displacement Ratio 80,4 HP/litre    (60 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 6,7 s
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 16,3 s
0 - 1000 m Acceleration
Top Speed 200 km/h   (124,3 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,85 : 1
Final Drive Ratio 4,44 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.MS.CS.LW.ARB.
Suspension (rear) I.STA.CS.
Brakes (front/rear) Di/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)