1953 - Studebaker - Commander Coupe

Technical Specs of This Model
1. Commander Coupe 1954
2. Commander Coupe 1953
General Information
Make Studebaker
Model Commander Coupe
Production Year 1953
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 3061 mm     (120,5 in)
Front Track 1435 mm     (56,5 in)
Rear Track 1410 mm     (55,5 in)
Length 5129 mm     (201,9 in)
Width 1803 mm     (71 in)
Height 1433 mm     (56,4 in)
Ground Clearance
Length / Wheelbase Ratio 1,68
Weight 1692 kg     (3726,9 lb)
Weight Distribution (front/rear) %54,5 / %45,5
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area 2,07
Cx
Engine Specifications
Engine Manufacturer
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 3809 cc     (232,44 cu in)
Bore 85,7 mm     (3,37 in)
Stroke 82,55 mm     (3,25 in)
Bore / Stroke Ratio 1,04
Unitary Capacity 476,12 cc/cylinder    (29,06 cu in/cylinder)
Number of Main Bearings
Compression Ratio 7 : 1
Fuel System Type
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 120 HP     (89,5 kW)
Maximum Engine Power rpm 4000 d/d
Maximum Engine Torque 258 N.m     (190,4 lb.ft ,  26,3 kg.m)
Maximum Engine Torque rpm 2000 d/d
Engine Torque at Max. Engine Power rpm 213,6 N.m    (4000 d/d)
Power / Weight Ratio 70,9 HP/ton    (52,9 W/kg)
Power / Engine Displacement Ratio 31,5 HP/litre    (23,5 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 12,1 s
0 - 60 mph 16,9 s
0 - 100 km/h
0 - 160 km/h -1 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 20,4 s
0 - 1000 m Acceleration
Top Speed 150 km/h   (93,2 mph)
Gearbox and Transmission
Transmission Type 3A
Top Gear Ratio 1 : 1
Final Drive Ratio 4,1 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front)
Suspension (rear)
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)