Homepage Technical Specifications of Cars Toyota Corolla 160i GLE

1996 - Toyota - Corolla 160i GLE

Technical Specs of This Model
1. Corolla 160i GLE 1996
General Information
Make Toyota
Model Corolla 160i GLE
Production Year 1996
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2465 mm     (97 in)
Front Track 1470 mm     (57,9 in)
Rear Track 1460 mm     (57,5 in)
Length 4285 mm     (168,7 in)
Width 1690 mm     (66,5 in)
Height 1385 mm     (54,5 in)
Ground Clearance 150 mm     (5,9 in)
Length / Wheelbase Ratio 1,74
Weight 1010 kg     (2224,7 lb)
Weight Distribution (front/rear)
Fuel Capacity 60 litre   (13,2 Imp gal ,  15,9 US gal)
Aerodynamics
Drag Coefficient 0,31
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Toyota
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 4    (Total of 16 Pieces)
Engine Displacement 1587 cc     (96,85 cu in)
Bore 81 mm     (3,19 in)
Stroke 77 mm     (3,03 in)
Bore / Stroke Ratio 1,05
Unitary Capacity 396,75 cc/cylinder    (24,21 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 9,5 : 1
Fuel System Type EFi
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter
Maximum Engine Power 106 HP     (79 kW)
Maximum Engine Power rpm 6000 d/d
Maximum Engine Torque 140 N.m     (103,3 lb.ft ,  14,3 kg.m)
Maximum Engine Torque rpm 4400 d/d
Engine Torque at Max. Engine Power rpm 125,8 N.m    (6000 d/d)
Power / Weight Ratio 105 HP/ton    (78,3 W/kg)
Power / Engine Displacement Ratio 66,8 HP/litre    (49,8 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 7 s
0 - 60 mph
0 - 100 km/h 10,3 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration 31,82 s
Top Speed 188 km/h   (116,8 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,82 : 1
Final Drive Ratio 4,06 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock) 3,3
Turning Circle Diameter 10,6 m    (34,8 ft)
Suspension (front) I.MS.
Suspension (rear) I.MS.ARB.
Brakes (front/rear) VeDi/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)