Homepage Technical Specifications of Cars Toyota Crown 2000 De Luxe A

1979 - Toyota - Crown 2000 De Luxe A

Technical Specs of This Model
1. Crown 2000 De Luxe A 1979
General Information
Make Toyota
Model Crown 2000 De Luxe A
Production Year 1979
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2690 mm     (105,9 in)
Front Track 1410 mm     (55,5 in)
Rear Track 1380 mm     (54,3 in)
Length 4690 mm     (184,6 in)
Width 1689 mm     (66,5 in)
Height 1440 mm     (56,7 in)
Ground Clearance 175 mm     (6,9 in)
Length / Wheelbase Ratio 1,74
Weight 1350 kg     (2973,6 lb)
Weight Distribution (front/rear)
Fuel Capacity 60 litre   (13,2 Imp gal ,  15,9 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Toyota
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 1988 cc     (121,32 cu in)
Bore 75 mm     (2,95 in)
Stroke 75 mm     (2,95 in)
Bore / Stroke Ratio 1
Unitary Capacity 331,33 cc/cylinder    (20,22 cu in/cylinder)
Number of Main Bearings 7
Compression Ratio 8,6 : 1
Fuel System Type 1 Ai carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 110 HP     (82 kW)
Maximum Engine Power rpm 5600 d/d
Maximum Engine Torque 157 N.m     (115,9 lb.ft ,  16 kg.m)
Maximum Engine Torque rpm 3800 d/d
Engine Torque at Max. Engine Power rpm 139,9 N.m    (5600 d/d)
Power / Weight Ratio 81,5 HP/ton    (60,8 W/kg)
Power / Engine Displacement Ratio 55,3 HP/litre    (41,3 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 160 km/h   (99,4 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 4,56 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type recirculating ball
Steering Turns (lock to lock) 4,6
Turning Circle Diameter 12,2 m    (40 ft)
Suspension (front) I.DW.CS.ARB.
Suspension (rear) RA.RA.TorqeA.CS.
Brakes (front/rear) Di/Dr-S
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)