Homepage Technical Specifications of Cars MG Montego Turbo

1988 - MG - Montego Turbo

Technical Specs of This Model
1. Montego Turbo 1988
General Information
Make MG
Model Montego Turbo
Production Year 1988
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2570 mm     (101,2 in)
Front Track 1486 mm     (58,5 in)
Rear Track 1468 mm     (57,8 in)
Length 4468 mm     (175,9 in)
Width 1709 mm     (67,3 in)
Height 1420 mm     (55,9 in)
Ground Clearance
Length / Wheelbase Ratio 1,74
Weight 1098 kg     (2418,5 lb)
Weight Distribution (front/rear) %63,4 / %36,6
Fuel Capacity 50 litre   (11 Imp gal ,  13,2 US gal)
Aerodynamics
Drag Coefficient 0,35
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Rover
Engine Location Front
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1994 cc     (121,68 cu in)
Bore 84,5 mm     (3,33 in)
Stroke 89 mm     (3,5 in)
Bore / Stroke Ratio 0,95
Unitary Capacity 498,5 cc/cylinder    (30,42 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 8,5 : 1
Fuel System Type Lucas fuel inj.
Aspiration Type Turbo
Compressor Type Garrett AiResearch T3 turbo
Intercooler Type
Catalytic Converter No
Maximum Engine Power 150 HP     (111,9 kW)
Maximum Engine Power rpm 5100 d/d
Maximum Engine Torque 229 N.m     (169 lb.ft ,  23,4 kg.m)
Maximum Engine Torque rpm 3500 d/d
Engine Torque at Max. Engine Power rpm 209,4 N.m    (5100 d/d)
Power / Weight Ratio 136,6 HP/ton    (101,9 W/kg)
Power / Engine Displacement Ratio 75,2 HP/litre    (56,1 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 5,8 s
0 - 60 mph 7,5 s
0 - 100 km/h
0 - 160 km/h 21,9 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 16,1 s
0 - 1000 m Acceleration 29,6 s
Top Speed 208 km/h   (129,3 mph)
Gearbox and Transmission
Transmission Type 5M
Top Gear Ratio 0,76 : 1
Final Drive Ratio 3,64 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion
Steering Turns (lock to lock) 3,5
Turning Circle Diameter
Suspension (front) I.MS.ARB.
Suspension (rear) SI.TA.CS.
Brakes (front/rear) Di/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)