Homepage Technical Specifications of Cars Datsun Laurel 200L Coupe

1973 - Datsun - Laurel 200L Coupe

Technical Specs of This Model
1. Laurel 200L Coupe 1973
General Information
Make Datsun
Model Laurel 200L Coupe
Production Year 1973
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 2670 mm     (105,1 in)
Front Track 1346 mm     (53 in)
Rear Track 1327 mm     (52,2 in)
Length 4498 mm     (177,1 in)
Width 1670 mm     (65,7 in)
Height 1417 mm     (55,8 in)
Ground Clearance
Length / Wheelbase Ratio 1,68
Weight 1775 kg     (3909,7 lb)
Weight Distribution (front/rear)
Fuel Capacity 60,2 litre   (13,2 Imp gal ,  15,9 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Nissan / Datsun
Engine Location Front
Engine Alignment
Engine Construction
Coolant Type Water
Engine Type SOHC
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1990 cc     (121,44 cu in)
Bore 89 mm     (3,5 in)
Stroke 80 mm     (3,15 in)
Bore / Stroke Ratio 1,11
Unitary Capacity 497,5 cc/cylinder    (30,36 cu in/cylinder)
Number of Main Bearings
Compression Ratio 8,3 : 1
Fuel System Type 2 Hi carbs
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 124 HP     (92,5 kW)
Maximum Engine Power rpm 5800 d/d
Maximum Engine Torque 171 N.m     (126,2 lb.ft ,  17,4 kg.m)
Maximum Engine Torque rpm 4400 d/d
Engine Torque at Max. Engine Power rpm 152,2 N.m    (5800 d/d)
Power / Weight Ratio 69,9 HP/ton    (52,1 W/kg)
Power / Engine Displacement Ratio 62,3 HP/litre    (46,5 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 9,3 s
0 - 60 mph 12,8 s
0 - 100 km/h 13,9 s
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 18,6 s
0 - 1000 m Acceleration 34,9 s
Top Speed 171 km/h   (106,3 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 3,89 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front)
Suspension (rear)
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)