1947 - Austin - A125

Technical Specs of This Model
1. A125 1947
General Information
Make Austin
Model A125
Production Year 1947
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 3030 mm     (119,3 in)
Front Track
Rear Track
Length 4877 mm     (192 in)
Width 1854 mm     (73 in)
Height
Ground Clearance
Length / Wheelbase Ratio 1,61
Weight 2000 kg     (4405,3 lb)
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Austin
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement S-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 3990 cc     (243,49 cu in)
Bore 87,3 mm     (3,44 in)
Stroke 111,1 mm     (4,37 in)
Bore / Stroke Ratio 0,79
Unitary Capacity 665 cc/cylinder    (40,58 cu in/cylinder)
Number of Main Bearings
Compression Ratio 6,8 : 1
Fuel System Type 1 St carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 125 HP     (93,2 kW)
Maximum Engine Power rpm
Maximum Engine Torque
Maximum Engine Torque rpm
Engine Torque at Max. Engine Power rpm
Power / Weight Ratio 62,5 HP/ton    (46,6 W/kg)
Power / Engine Displacement Ratio 31,3 HP/litre    (23,4 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 12,4 s
0 - 60 mph
0 - 100 km/h
0 - 160 km/h -1 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 21,9 s
0 - 1000 m Acceleration
Top Speed 132 km/h   (82 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 4,55 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.CS.
Suspension (rear) LA.SE.
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)