1971 - Jensen - SP Automatic

Technical Specs of This Model
1. SP Automatic 1971
General Information
Make Jensen
Model SP Automatic
Production Year 1971
Country
Designer Touring
Production Number 232
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 2667 mm     (105 in)
Front Track 1448 mm     (57 in)
Rear Track 1448 mm     (57 in)
Length 4775 mm     (188 in)
Width 1753 mm     (69 in)
Height 1359 mm     (53,5 in)
Ground Clearance 140 mm     (5,5 in)
Length / Wheelbase Ratio 1,79
Weight 1783 kg     (3927,3 lb)
Weight Distribution (front/rear) %52 / %48
Fuel Capacity 90,9 litre   (20 Imp gal ,  24 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Chrysler
Engine Location Front
Engine Alignment Longitudinal
Engine Construction cast iron block & head
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 7206 cc     (439,74 cu in)
Bore 109,7 mm     (4,32 in)
Stroke 95,3 mm     (3,75 in)
Bore / Stroke Ratio 1,15
Unitary Capacity 900,75 cc/cylinder    (54,97 cu in/cylinder)
Number of Main Bearings 5
Compression Ratio 10,3 : 1
Fuel System Type 3 Ho carbs
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 385 HP     (287,1 kW)
Maximum Engine Power rpm 4700 d/d
Maximum Engine Torque 556 N.m     (410,3 lb.ft ,  56,7 kg.m)
Maximum Engine Torque rpm 3600 d/d
Engine Torque at Max. Engine Power rpm 583,3 N.m    (4700 d/d)
Power / Weight Ratio 215,9 HP/ton    (161 W/kg)
Power / Engine Displacement Ratio 53,4 HP/litre    (39,8 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 5,9 s
0 - 60 mph 7,6 s
0 - 100 km/h
0 - 160 km/h 18,5 s
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 15,6 s
0 - 1000 m Acceleration 28,5 s
Top Speed 230 km/h   (142,9 mph)
Gearbox and Transmission
Transmission Type 3A
Top Gear Ratio 1 : 1
Final Drive Ratio 2,88 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion PAS
Steering Turns (lock to lock) 3,4
Turning Circle Diameter 11,6 m    (38,1 ft)
Suspension (front) I.W.CS.
Suspension (rear) LA.SE.
Brakes (front/rear) VeDi/VeDi-S
Brake Disc Diameter (front) 273 mm
Brake Disc Diameter (rear) 273 mm
Wheels (front) 6.5JK x 15
Wheels (rear) 6.5JK x 15
Tyres (front) Pirelli GR 70 VR 15
Tyres (rear) Pirelli GR 70 VR 15