Homepage Technical Specifications of Cars Kaiser Henry J Corsair

1954 - Kaiser - Henry J Corsair

Technical Specs of This Model
1. Henry J Corsair
2. Henry J Corsair 1954
General Information
Make Kaiser
Model Henry J Corsair
Production Year 1954
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors
Wheelbase 2540 mm     (100 in)
Front Track
Rear Track
Length 4616 mm     (181,7 in)
Width 1765 mm     (69,5 in)
Height 1549 mm     (61 in)
Ground Clearance 191 mm     (7,5 in)
Length / Wheelbase Ratio 1,82
Weight 1086 kg     (2392,1 lb)
Weight Distribution (front/rear)
Fuel Capacity 45,5 litre   (10 Imp gal ,  12 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type SV
Number of Cylinders and Placement S-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 2200 cc     (134,25 cu in)
Bore 79,4 mm     (3,13 in)
Stroke 111,1 mm     (4,37 in)
Bore / Stroke Ratio 0,71
Unitary Capacity 550 cc/cylinder    (33,56 cu in/cylinder)
Number of Main Bearings
Compression Ratio 7 : 1
Fuel System Type 1 Ca carb
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 68 HP     (50,7 kW)
Maximum Engine Power rpm 4000 d/d
Maximum Engine Torque 165 N.m     (121,8 lb.ft ,  16,8 kg.m)
Maximum Engine Torque rpm 1800 d/d
Engine Torque at Max. Engine Power rpm 121,1 N.m    (4000 d/d)
Power / Weight Ratio 62,6 HP/ton    (46,7 W/kg)
Power / Engine Displacement Ratio 30,9 HP/litre    (23 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 3M
Top Gear Ratio 1 : 1
Final Drive Ratio 4,1 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter 10,7 m    (35,1 ft)
Suspension (front) I.CS.
Suspension (rear) LA.SE.
Brakes (front/rear) Dr/Dr
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)