1963 - Lancia - Fulvia Saloon

Technical Specs of This Model
1. Fulvia Saloon 1963
2. Fulvia Saloon 1963
General Information
Make Lancia
Model Fulvia Saloon
Production Year 1963
Country
Designer
Production Number
Model Code
Model Family Fulvia Series 1
Chassis and Dimensions
Chassis Type 4/5S SAL
Number of Doors 4
Wheelbase 2502 mm     (98,5 in)
Front Track 1302 mm     (51,3 in)
Rear Track 1283 mm     (50,5 in)
Length 4153 mm     (163,5 in)
Width 1556 mm     (61,3 in)
Height 1397 mm     (55 in)
Ground Clearance 191 mm     (7,5 in)
Length / Wheelbase Ratio 1,66
Weight 1070 kg     (2356,8 lb)
Weight Distribution (front/rear) %61,8 / %38,2
Fuel Capacity 42 litre   (9,2 Imp gal ,  11,1 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Lancia
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement V-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1298 cc     (79,21 cu in)
Bore 77 mm     (3,03 in)
Stroke 69,7 mm     (2,74 in)
Bore / Stroke Ratio 1,1
Unitary Capacity 324,5 cc/cylinder    (19,8 cu in/cylinder)
Number of Main Bearings 3
Compression Ratio 9 : 1
Fuel System Type 2 So C35 PHH carbs
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 87 HP     (64,9 kW)
Maximum Engine Power rpm 6000 d/d
Maximum Engine Torque 114 N.m     (84,1 lb.ft ,  11,6 kg.m)
Maximum Engine Torque rpm 4500 d/d
Engine Torque at Max. Engine Power rpm 103,3 N.m    (6000 d/d)
Power / Weight Ratio 81,3 HP/ton    (60,6 W/kg)
Power / Engine Displacement Ratio 67 HP/litre    (50 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h 10 s
0 - 60 mph 14,2 s
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration 19,5 s
0 - 1000 m Acceleration 36,4 s
Top Speed 164 km/h   (101,9 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio 4,1 : 1
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type worm & roller
Steering Turns (lock to lock) 4,3
Turning Circle Diameter 12,2 m    (40 ft)
Suspension (front) I.TL.W.
Suspension (rear) DA.SE.PR.
Brakes (front/rear) Di/Di-S
Brake Disc Diameter (front) 267 mm
Brake Disc Diameter (rear) 267 mm
Wheels (front) 4.5 x 14
Wheels (rear) 4.5 x 14
Tyres (front) Michelin ZX 155-14
Tyres (rear) Michelin ZX 155-14