Homepage Technical Specifications of Cars Lancia Flavia 1800 Injection Convertible

1968 - Lancia - Flavia 1800 Injection Convertible

Technical Specs of This Model
1. Flavia 1800 Injection Convertible 1968
General Information
Make Lancia
Model Flavia 1800 Injection Convertible
Production Year 1968
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 DHC
Number of Doors 2
Wheelbase 2479 mm     (97,6 in)
Front Track 1300 mm     (51,2 in)
Rear Track 1280 mm     (50,4 in)
Length 4340 mm     (170,9 in)
Width 1610 mm     (63,4 in)
Height 1370 mm     (53,9 in)
Ground Clearance
Length / Wheelbase Ratio 1,75
Weight 1110 kg     (2444,9 lb)
Weight Distribution (front/rear)
Fuel Capacity 48,2 litre   (10,6 Imp gal ,  12,7 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Lancia
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement F-4
Valves per Cylinder 2    (Total of 8 Pieces)
Engine Displacement 1800 cc     (109,84 cu in)
Bore 88 mm     (3,46 in)
Stroke 74 mm     (2,91 in)
Bore / Stroke Ratio 1,19
Unitary Capacity 450 cc/cylinder    (27,46 cu in/cylinder)
Number of Main Bearings
Compression Ratio 9 : 1
Fuel System Type Ku fuel inj.
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 101 HP     (75,3 kW)
Maximum Engine Power rpm 5200 d/d
Maximum Engine Torque 153 N.m     (112,9 lb.ft ,  15,6 kg.m)
Maximum Engine Torque rpm 3500 d/d
Engine Torque at Max. Engine Power rpm 138,3 N.m    (5200 d/d)
Power / Weight Ratio 91 HP/ton    (67,9 W/kg)
Power / Engine Displacement Ratio 56,1 HP/litre    (41,8 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 180 km/h   (111,9 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio
Drive Wheels FWD (Front Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type worm & roller
Steering Turns (lock to lock)
Turning Circle Diameter 10,3 m    (33,8 ft)
Suspension (front) I.DW.TL.ARB.
Suspension (rear) DA.SE.PR.ARB.
Brakes (front/rear) Di/Di
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)