Homepage Technical Specifications of Cars Lancia Flaminia 2.8 GTL Touring

1963 - Lancia - Flaminia 2.8 GTL Touring

Technical Specs of This Model
1. Flaminia 2.8 GTL Touring 1963
General Information
Make Lancia
Model Flaminia 2.8 GTL Touring
Production Year 1963
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2+2 FHC
Number of Doors 2
Wheelbase 2600 mm     (102,4 in)
Front Track 1368 mm     (53,9 in)
Rear Track 1370 mm     (53,9 in)
Length 4530 mm     (178,3 in)
Width 1660 mm     (65,4 in)
Height 1370 mm     (53,9 in)
Ground Clearance
Length / Wheelbase Ratio 1,74
Weight 1370 kg     (3017,6 lb)
Weight Distribution (front/rear)
Fuel Capacity 56,8 litre   (12,5 Imp gal ,  15 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Lancia
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement V-6
Valves per Cylinder 2    (Total of 12 Pieces)
Engine Displacement 2775 cc     (169,34 cu in)
Bore 85 mm     (3,35 in)
Stroke 81,5 mm     (3,21 in)
Bore / Stroke Ratio 1,04
Unitary Capacity 462,5 cc/cylinder    (28,22 cu in/cylinder)
Number of Main Bearings
Compression Ratio 9 : 1
Fuel System Type 3 We carbs
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter No
Maximum Engine Power 148 HP     (110,4 kW)
Maximum Engine Power rpm 5400 d/d
Maximum Engine Torque 224 N.m     (165,3 lb.ft ,  22,8 kg.m)
Maximum Engine Torque rpm 3500 d/d
Engine Torque at Max. Engine Power rpm 195,2 N.m    (5400 d/d)
Power / Weight Ratio 108 HP/ton    (80,6 W/kg)
Power / Engine Displacement Ratio 53,3 HP/litre    (39,8 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed 192 km/h   (119,3 mph)
Gearbox and Transmission
Transmission Type 4M
Top Gear Ratio 1 : 1
Final Drive Ratio
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type worm & roller
Steering Turns (lock to lock)
Turning Circle Diameter 11 m    (36,1 ft)
Suspension (front) I.CS.W.
Suspension (rear) dD.SE.
Brakes (front/rear) Di/Di
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)