1988 - Italdesign - Aspid

Technical Specs of This Model
1. Aspid 1988
General Information
Make Italdesign
Model Aspid
Production Year 1988
Country
Designer Italdesign
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 2S FHC
Number of Doors 2
Wheelbase 2600 mm     (102,4 in)
Front Track 1670 mm     (65,7 in)
Rear Track 1660 mm     (65,4 in)
Length 4270 mm     (168,1 in)
Width 1970 mm     (77,6 in)
Height 1110 mm     (43,7 in)
Ground Clearance
Length / Wheelbase Ratio 1,64
Weight
Weight Distribution (front/rear)
Fuel Capacity
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Audi
Engine Location Middle
Engine Alignment Transverse
Engine Construction
Coolant Type Water
Engine Type DOHC
Number of Cylinders and Placement S-5
Valves per Cylinder 4    (Total of 20 Pieces)
Engine Displacement 2226 cc     (135,84 cu in)
Bore 81 mm     (3,19 in)
Stroke 86,4 mm     (3,4 in)
Bore / Stroke Ratio 0,94
Unitary Capacity 445,2 cc/cylinder    (27,17 cu in/cylinder)
Number of Main Bearings 6
Compression Ratio
Fuel System Type
Aspiration Type Turbo
Compressor Type
Intercooler Type
Catalytic Converter No
Maximum Engine Power 200 HP     (149,1 kW)
Maximum Engine Power rpm 6200 d/d
Maximum Engine Torque
Maximum Engine Torque rpm
Engine Torque at Max. Engine Power rpm 229,7 N.m    (6200 d/d)
Power / Weight Ratio
Power / Engine Displacement Ratio 89,8 HP/litre    (67 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type
Top Gear Ratio
Final Drive Ratio
Drive Wheels AWD (All Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front)
Suspension (rear)
Brakes (front/rear)
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)