Homepage Technical Specifications of Cars Holden Commodore SS Wagon Series II Automatic

2003 - Holden - Commodore SS Wagon Series II Automatic

Technical Specs of This Model
1. Commodore SS Wagon Series II Automatic 2003
General Information
Make Holden
Model Commodore SS Wagon Series II Automatic
Production Year 2003
Country
Designer
Production Number
Model Code
Model Family
Chassis and Dimensions
Chassis Type 4/5S EST
Number of Doors 5
Wheelbase 2938 mm     (115,7 in)
Front Track 1569 mm     (61,8 in)
Rear Track 1587 mm     (62,5 in)
Length 5025 mm     (197,8 in)
Width 1847 mm     (72,7 in)
Height 1527 mm     (60,1 in)
Ground Clearance
Length / Wheelbase Ratio 1,71
Weight
Weight Distribution (front/rear)
Fuel Capacity 75 litre   (16,5 Imp gal ,  19,8 US gal)
Aerodynamics
Drag Coefficient
Frontal Area
Cx
Engine Specifications
Engine Manufacturer Chevrolet
Engine Location Front
Engine Alignment Longitudinal
Engine Construction
Coolant Type Water
Engine Type OHV
Number of Cylinders and Placement V-8
Valves per Cylinder 2    (Total of 16 Pieces)
Engine Displacement 5666 cc     (345,76 cu in)
Bore 99 mm     (3,9 in)
Stroke 92 mm     (3,62 in)
Bore / Stroke Ratio 1,08
Unitary Capacity 708,25 cc/cylinder    (43,22 cu in/cylinder)
Number of Main Bearings
Compression Ratio 10,1 : 1
Fuel System Type SFi
Aspiration Type Normal
Compressor Type -
Intercooler Type None
Catalytic Converter Yes
Maximum Engine Power 328 HP     (244,6 kW)
Maximum Engine Power rpm 5600 d/d
Maximum Engine Torque 465 N.m     (343,2 lb.ft ,  47,4 kg.m)
Maximum Engine Torque rpm 4000 d/d
Engine Torque at Max. Engine Power rpm 417,1 N.m    (5600 d/d)
Power / Weight Ratio
Power / Engine Displacement Ratio 57,9 HP/litre    (43,2 kW/litre)
CO2 Emissions
Fuel Consumption
Performance
0 - 80 km/h
0 - 60 mph
0 - 100 km/h
0 - 160 km/h
80 - 120 km/h (in top gear)
0 - 400 m Acceleration
0 - 1000 m Acceleration
Top Speed
Gearbox and Transmission
Transmission Type 4A
Top Gear Ratio 0,7 : 1
Final Drive Ratio 3,08 : 1
Drive Wheels RWD (Rear Wheel Drive)
Handling, Suspension Geometry and Brakes
Steering Type rack & pinion VPAS
Steering Turns (lock to lock)
Turning Circle Diameter
Suspension (front) I.MS.CS.ARB.
Suspension (rear) I.
Brakes (front/rear) VeDi/Di-S-ABS
Brake Disc Diameter (front)
Brake Disc Diameter (rear)
Wheels (front)
Wheels (rear)
Tyres (front)
Tyres (rear)